Oil catch trays for garage

Looking for parts or service, or have someone to recommend? Post here!
Post Reply
User avatar
tannyo
Veteran Member
Posts: 1053
Joined: Wed May 20, 2009 1:58 pm
Vehicles Owned: 1967 MGB GT
Location: North Hollywood, CA
Contact:

Oil catch trays for garage

Post by tannyo »

Where can I find large trays to go on the floor of my garage to catch dripping oil? I don't know what they're called, but they look like really big cookie sheets.
User avatar
Steve Simmons
Site Admin
Posts: 4093
Joined: Thu Sep 07, 2006 9:45 pm
Vehicles Owned: .
1946 John Deere AN
1948 MG TC
1949 MG TC
1949 MG TC EXU
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS
Location: Co-Nay-Ho Valley
Contact:

Re: Oil catch trays for garage

Post by Steve Simmons »

I've bought many of them from Napa. I think they cost around $7, and are zinc-coated tin. If they're used outside then they will eventually rust, despite the coating. Used in the garage they last forever. I use four of them on each lift as drip protection for the cars underneath, and two of them in the driveway for the Model T. You think your MGB leaks? Model Ts leak faster than you can pour it in! Probably their way of preserving the roads back then...

Or, you can get stainless steel trays from a restaurant supply place but they cost a lot more.
My77b
Active Member
Posts: 29
Joined: Sat Oct 13, 2007 8:06 pm
Location: Simi Valley, Ca

Re: Oil catch trays for garage

Post by My77b »

Kragen has them for $7.00 also.

Glenn
Iit is a daily driver
User avatar
VWNate1
Veteran Member
Posts: 1397
Joined: Sat Sep 05, 2009 7:41 am
Vehicles Owned: LBC's

Mercedes Diesels OM 616 & 617

1969 Chevrolet C/10 pickup shop truck
250 I-6 , TH350 slushbox

1959 Nash Metropolitan FH Sports Coupe

1961 Morris Minor W/ 1973 1275 CC engine & gearbox

Ural Solo Motos , old Honda 90 CC Tiddlers
Location: Sunny So. Cal. , land of fruits , nuts & flakes

Re: Oil catch trays for garage

Post by VWNate1 »

I've been using the ' PLEWS ' brand ones for many a year , they work great and NAPA stores carry them .

Every time you're finishing up working on the car , wipe the collected oil up with the all ready oily rags you're about to throw out .

I've had two of these outside for nearly 20 years , the galvanizing really resists rusting but they do get some whiteish crud growing .
-Nate
User avatar
RodH
Active Member
Posts: 17
Joined: Thu Jul 02, 2009 6:52 am
Vehicles Owned: 1959 Austin Healey Sprite w/ 2 liter supercharged Ford Zetec

Ones that got away:
1961 E-type
1967 Lotus Elan
1958 Austin Healey 100-6
1968 Triumph GT6
1958 Porsche 356a
Location: Yorba Linda, CA

Re: Oil catch trays for garage

Post by RodH »

I feel it's wrong to keep a British Car from marking it's territory, that's how it finds it's way home. :P
Martin Keller
Core Member
Posts: 952
Joined: Tue Sep 18, 2007 10:04 pm
Location: Ventura, Ca.

Re: Oil catch trays for garage

Post by Martin Keller »

RodH wrote:I feel it's wrong to keep a British Car from marking it's territory, that's how it finds it's way home. :P
So true and funny..... :thumbs:
Martin Keller
Ventura, Ca.
User avatar
tannyo
Veteran Member
Posts: 1053
Joined: Wed May 20, 2009 1:58 pm
Vehicles Owned: 1967 MGB GT
Location: North Hollywood, CA
Contact:

Re: Oil catch trays for garage

Post by tannyo »

I've heard it said that vintage British cars are like puppies, they leave puddles wherever they go.
User avatar
VWNate1
Veteran Member
Posts: 1397
Joined: Sat Sep 05, 2009 7:41 am
Vehicles Owned: LBC's

Mercedes Diesels OM 616 & 617

1969 Chevrolet C/10 pickup shop truck
250 I-6 , TH350 slushbox

1959 Nash Metropolitan FH Sports Coupe

1961 Morris Minor W/ 1973 1275 CC engine & gearbox

Ural Solo Motos , old Honda 90 CC Tiddlers
Location: Sunny So. Cal. , land of fruits , nuts & flakes

Re : Seeps & Weeps

Post by VWNate1 »

Are O.K. but having oily dirty cement , is a bad thing when you work on it all the time .

That's the beauty of these steel trays .
-Nate
Westfield 11
Active Member
Posts: 66
Joined: Fri Jun 15, 2007 9:04 am
Location: Woodland Hills

Re: Oil catch trays for garage

Post by Westfield 11 »

Just go to a resturant supply store and buy alloy baking pans/cookie sheets. They are about 1/8" thick, 24X36 with a 1 inch lip and cost 3 or 4 dollars. I have a dozen or so that I use for drip pans and as parts trays. They never rust and are easy to reshape with you drive over them
Post Reply