Who in the L.A. area can be trusted to do this job ? .
My Metropolitan Nash has flopped out rubber bushings and I have Polyurethene ones to go in , just the lower A-Frames for right now but I need it attended to ASAP as I'm hitting the road soon .
Malcom , if you're back and feel like doing this job , give me a ring as I don't want some bozo with no LBC experience mucking about with it .
TIA ,
Midget/Sprite A Frame Bushings ?
- VWNate1
- Veteran Member
- Posts: 1402
- Joined: Sat Sep 05, 2009 7:41 am
- Vehicles Owned: LBC's
Mercedes Diesels OM 616 & 617
1969 Chevrolet C/10 pickup shop truck
250 I-6 , TH350 slushbox
1959 Nash Metropolitan FH Sports Coupe
1961 Morris Minor W/ 1973 1275 CC engine & gearbox
Ural Solo Motos , old Honda 90 CC Tiddlers - Location: Sunny So. Cal. , land of fruits , nuts & flakes
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
Re: Midget/Sprite A Frame Bushings ?
My first thought considering your location would be Monise Motors in Pasadena. Darrin's MG Service in Chatsworth isn't too much farther. Over in Sherman Oaks is Kavanaugh Motors as well.
- malcolmr18zoy
- Core Member
- Posts: 719
- Joined: Sun Jul 05, 2009 2:18 pm
- Vehicles Owned: 1959 MGA 1600 Coupe
1949 MG TC
1965 Jaguar 3.8S
1966 MGB GT
1964 MG Midget
1985 BMW 528i
1990 Jaguar XJS V12 convertible
1995 Landrover Discovery
2003 BMW 325i wagon.(wife's car) - Location: Big Bear City, CA
Re: Midget/Sprite A Frame Bushings ?
Sorry Nate,
I won't be back until the 25th of March.
Malcolm
I won't be back until the 25th of March.
Malcolm
- VWNate1
- Veteran Member
- Posts: 1402
- Joined: Sat Sep 05, 2009 7:41 am
- Vehicles Owned: LBC's
Mercedes Diesels OM 616 & 617
1969 Chevrolet C/10 pickup shop truck
250 I-6 , TH350 slushbox
1959 Nash Metropolitan FH Sports Coupe
1961 Morris Minor W/ 1973 1275 CC engine & gearbox
Ural Solo Motos , old Honda 90 CC Tiddlers - Location: Sunny So. Cal. , land of fruits , nuts & flakes
Re: Monise Motors
Is Frank still alive ? I used to work across the street from his shop on Walnut in Pasadena , I remember him and his son going out to Riverside with......? a Lotus ? I forget what .
I don't recall him working on LBC's but that was an eternity ago , I'll go by and ask him .
I drove the Met to-day , it's running sweetly but really needs points ~ the new ones are crapped up and it didn't want to start this morning @ 0-Dark:30 ~ after putzing with it a moment , I dug a clean (and thereby lint free) business card out of my wallet and dragged it through the points a couple times until it came out clean , then it lit right off and ran fine , only to-night right at sunset did it once again refuse to fire so I might not be driving it to-morrow .
I'll be needing a new set of 25D points , if anyone sees some old stock ones in the vendors area , be SURE and drag me over to see them ! .
I can always get them for $8.00 @ NAPA on Monday but I'd like to fix it to-morrow afternoon if I can .
These points were new less than 8,000 miles ago , I'm pissed off they failed so soon .
C U to-morrow !
I don't recall him working on LBC's but that was an eternity ago , I'll go by and ask him .
I drove the Met to-day , it's running sweetly but really needs points ~ the new ones are crapped up and it didn't want to start this morning @ 0-Dark:30 ~ after putzing with it a moment , I dug a clean (and thereby lint free) business card out of my wallet and dragged it through the points a couple times until it came out clean , then it lit right off and ran fine , only to-night right at sunset did it once again refuse to fire so I might not be driving it to-morrow .
I'll be needing a new set of 25D points , if anyone sees some old stock ones in the vendors area , be SURE and drag me over to see them ! .
I can always get them for $8.00 @ NAPA on Monday but I'd like to fix it to-morrow afternoon if I can .
These points were new less than 8,000 miles ago , I'm pissed off they failed so soon .
C U to-morrow !
-Nate
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
Re: Midget/Sprite A Frame Bushings ?
I believe Frank's son is running the business full time now. I don't know Frank's status.
Hey, if you can get the Met running well enough to get to the show, we can always pop some points in it on the spot. I probably have some new Lucas points laying around I can bring. They aren't the best quality but seem to work fine. I have a set in more than one car.
Hey, if you can get the Met running well enough to get to the show, we can always pop some points in it on the spot. I probably have some new Lucas points laying around I can bring. They aren't the best quality but seem to work fine. I have a set in more than one car.
- VWNate1
- Veteran Member
- Posts: 1402
- Joined: Sat Sep 05, 2009 7:41 am
- Vehicles Owned: LBC's
Mercedes Diesels OM 616 & 617
1969 Chevrolet C/10 pickup shop truck
250 I-6 , TH350 slushbox
1959 Nash Metropolitan FH Sports Coupe
1961 Morris Minor W/ 1973 1275 CC engine & gearbox
Ural Solo Motos , old Honda 90 CC Tiddlers - Location: Sunny So. Cal. , land of fruits , nuts & flakes
Re: Ignition Fiddles
O.K. , maybe I'll give it a go in the morning , I wanted to leave well before sunup (around 04:00) and run some errands , go home to my dogs and unload the crap I filled it with to-day but maybe I'll just buzz it up the I-405 instead , I assume you have a test light or dynamic timing light ? I don't have one in the car .
-Nate