Hello everyone,
hi Steve, was wondering if you knew of a good exhaust shop who can fabricate a bigger bore pipe and straight through box for the MGA Twin Cam. Hopefully somewhere in the valley or west side in Los Angeles.
cheers
Mark
exhaust fabricator
- TEAM ROSBIF
- Active Member
- Posts: 284
- Joined: Sat Jun 14, 2008 11:41 am
exhaust fabricator
WORKS MGA TWIN CAM YD1
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
Hi Mark, I've used a shop in Chatsworth to do work on four of my M.G.s. He's an old school one man operation and hand forms everything while you tell him where you want the bends.
Chatsworth Muffler
21640 Devonshire St
Chatsworth, CA 91311
(818) 700-0611
He works on appointments so give him a call before driving there. Good luck!
PS... post some photos of that Twin Cam in the "Post a picture of your ride" thread!
Chatsworth Muffler
21640 Devonshire St
Chatsworth, CA 91311
(818) 700-0611
He works on appointments so give him a call before driving there. Good luck!
PS... post some photos of that Twin Cam in the "Post a picture of your ride" thread!
- TEAM ROSBIF
- Active Member
- Posts: 284
- Joined: Sat Jun 14, 2008 11:41 am
- TEAM ROSBIF
- Active Member
- Posts: 284
- Joined: Sat Jun 14, 2008 11:41 am
Re: exhaust fabricator
Hi Steve, thanks so much for the tip on Richard at Chatsworth muffler, he was great and we designed a beautiful exhaust system. Got the car running, it sounds good, but noticed that since its been sitting for 9 years, the brake master cylinder has stuck. So I hauled both clutch and brake master cylinders to be rebuilt and re sleeved, a messy job but luckily the car had dot 5 put in in England.
Still waiting for the original SU pump to be rebuilt by Burlen UK, but in the meantime running with a temporary pump. Next I have to install the seats, seat belts and take it to the CHP to be inspected for US registration.
thats the latest
cheers
Mark
Still waiting for the original SU pump to be rebuilt by Burlen UK, but in the meantime running with a temporary pump. Next I have to install the seats, seat belts and take it to the CHP to be inspected for US registration.
thats the latest
cheers
Mark
WORKS MGA TWIN CAM YD1
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
Re: exhaust fabricator
Hi Mark, who are you using to rebuild the MGA master cylinder? I need to have the same thing done very soon.
- TEAM ROSBIF
- Active Member
- Posts: 284
- Joined: Sat Jun 14, 2008 11:41 am
Re: exhaust fabricator
yes, sending both out to Apple Hydraulics, got a good deal on shipping.
MARK
MARK
WORKS MGA TWIN CAM YD1
- VWNate1
- Veteran Member
- Posts: 1402
- Joined: Sat Sep 05, 2009 7:41 am
- Vehicles Owned: LBC's
Mercedes Diesels OM 616 & 617
1969 Chevrolet C/10 pickup shop truck
250 I-6 , TH350 slushbox
1959 Nash Metropolitan FH Sports Coupe
1961 Morris Minor W/ 1973 1275 CC engine & gearbox
Ural Solo Motos , old Honda 90 CC Tiddlers - Location: Sunny So. Cal. , land of fruits , nuts & flakes
Re: exhaust fabricator PASADENA
I use Keith @Advance Muffler on Walnut , East of Lake a few blocks .
he's a ' unique ' individual but willingly does all the oddball custom stuff I ask and is very reasonable on pricing too .
He recently deleted the muffler on my Mercedes Coupe and installed a whole 3" system , new resonator etc. , telling me I'm crazy the entire time but the Diesel engine loves it and revs faster now , runs cooler too .
Lots of fun stories and ideas whilst he's under your car with torch in hand too .
he's a ' unique ' individual but willingly does all the oddball custom stuff I ask and is very reasonable on pricing too .
He recently deleted the muffler on my Mercedes Coupe and installed a whole 3" system , new resonator etc. , telling me I'm crazy the entire time but the Diesel engine loves it and revs faster now , runs cooler too .
Lots of fun stories and ideas whilst he's under your car with torch in hand too .
-Nate