Tire fitting

Looking for parts or service, or have someone to recommend? Post here!
Post Reply
DaveC
Active Member
Posts: 70
Joined: Sun Jan 01, 2012 3:38 am
Vehicles Owned: 59 Peerless GT
63 Morgan Plus4
Location: Santa Monica, CA

Tire fitting

Post by DaveC »

Any recommendations of good tire places that are experienced with wire wheels?

I have usually used Stokes Tire Pros in Santa Monica for sensitive work but they want $25 per wheel extra to fit tubes on wires, even with me providing the tubes. Before spending the extra $100, I thought I'd look for other recommendations.

dave
User avatar
tannyo
Veteran Member
Posts: 1057
Joined: Wed May 20, 2009 1:58 pm
Vehicles Owned: 1967 MGB GT
Location: North Hollywood, CA
Contact:

Re: Tire fitting

Post by tannyo »

Pico Wheel Service in Chatdworth, CA

(818) 982-0375

Though I don't know if they're going to be any less expensive.
User avatar
Steve Simmons
Site Admin
Posts: 4106
Joined: Thu Sep 07, 2006 9:45 pm
Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS
Location: Co-Nay-Ho Valley
Contact:

Re: Tire fitting

Post by Steve Simmons »

Pico is in North Hollywood I believe. Also Valley Wire Wheel nearby. Chatsworth Tire can also do tubes and wire wheels.
User avatar
tannyo
Veteran Member
Posts: 1057
Joined: Wed May 20, 2009 1:58 pm
Vehicles Owned: 1967 MGB GT
Location: North Hollywood, CA
Contact:

Re: Tire fitting

Post by tannyo »

Steve Simmons wrote:Pico is in North Hollywood I believe. Also Valley Wire Wheel nearby. Chatsworth Tire can also do tubes and wire wheels.
They moved to Chatsworth this year. They're at the north side of Canoga where it turns west. They lost their lease on the place in North Hollywood where they had been for over 20 years after the owner of the building passed away.
User avatar
Jimmy
Don't take him seriously!
Posts: 1434
Joined: Tue May 26, 2009 7:25 pm
Vehicles Owned: '74-1/2 MGB
'76 MGB (parts car)
'52 TD
'71 MGB staqtion wagon
'69 MGB (parts car)
'60 Sprite
'79 MG Midget (parts car)
'63 LBC
Plus, a Turbo S (with a damn roof) in the household.
And three Mercedes on 20" wheels.
Location: NM

Re: Tire fitting

Post by Jimmy »

Get rid of the tubes, that'll save frustration, time, and money.
I had good luck with silicone and tube bands (okay, tape) - or, use the real thing; windshield sealant.
In baseball, running into someone is apparently a "collision".
But doing the same thing in a car somehow makes it an "accident".
DaveC
Active Member
Posts: 70
Joined: Sun Jan 01, 2012 3:38 am
Vehicles Owned: 59 Peerless GT
63 Morgan Plus4
Location: Santa Monica, CA

Re: Tire fitting

Post by DaveC »

Thanks Gents.

Silicone and tube tape? I didn't know wires without tubes worked
User avatar
tannyo
Veteran Member
Posts: 1057
Joined: Wed May 20, 2009 1:58 pm
Vehicles Owned: 1967 MGB GT
Location: North Hollywood, CA
Contact:

Re: Tire fitting

Post by tannyo »

DaveC wrote:Thanks Gents.

Silicone and tube tape? I didn't know wires without tubes worked
Sure, I have Dayton tubeless wire wheels on my MGB. I believe you can also buy tubeless wire wheels from Moss.
User avatar
Jimmy
Don't take him seriously!
Posts: 1434
Joined: Tue May 26, 2009 7:25 pm
Vehicles Owned: '74-1/2 MGB
'76 MGB (parts car)
'52 TD
'71 MGB staqtion wagon
'69 MGB (parts car)
'60 Sprite
'79 MG Midget (parts car)
'63 LBC
Plus, a Turbo S (with a damn roof) in the household.
And three Mercedes on 20" wheels.
Location: NM

Re: Tire fitting

Post by Jimmy »

Or, make your own. For much less money.
In baseball, running into someone is apparently a "collision".
But doing the same thing in a car somehow makes it an "accident".
User avatar
Steve Simmons
Site Admin
Posts: 4106
Joined: Thu Sep 07, 2006 9:45 pm
Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS
Location: Co-Nay-Ho Valley
Contact:

Re: Tire fitting

Post by Steve Simmons »

There are two things that make a wire wheel tubeless. First is a sealer applied over the heads of the spoke nipples. Second thing is a "safety lip" on the bead of the rim. This lip is designed to prevent the tire from rolling off of the rim if rapid deflation occurs in a hard corner. For many years, and possibly still, tubeless wire wheels were not available in sizes under 5" because no one made narrow rims with safety lips. Whether or not these lips are necessary is an often debated topic.

I can see certain advantages of tubeless tires versus tubed, but personally I feel that the advantages do not outweigh the disadvantages of tubes in these old cars.
Post Reply