What is your current project?
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
What is your current project?
NOTE: This thread was originally started by Larry Kluss, and has now been split into the new restoration forum. Therefore the remaining posts in this thread may not make sense!
What project(s) are taking up your spare time right now? Mine is a 1965 MGB. It was never intended to be a long-term project but the "might as wells" got me good.
The engine is being rebuilt. The transmission has also been rebuilt and now has an overdrive attached. I dropped the front cross member and rebuilt the suspension and steering rack, including a high-ratio rack and pinion.
I've replaced the steel hood with the proper aluminum one and stripped the engine bay completely. Next is painting the engine bay and hood, and then start putting it all back together again. What I will end up with a a 310,000 mile car with a ground up restoration from the fire wall forward, and an unrestored back two thirds!
Photo of today's progress: (suspension coated in POR15 and Black Cote, Superflex bushings, rebuilt shocks)
What project(s) are taking up your spare time right now? Mine is a 1965 MGB. It was never intended to be a long-term project but the "might as wells" got me good.
The engine is being rebuilt. The transmission has also been rebuilt and now has an overdrive attached. I dropped the front cross member and rebuilt the suspension and steering rack, including a high-ratio rack and pinion.
I've replaced the steel hood with the proper aluminum one and stripped the engine bay completely. Next is painting the engine bay and hood, and then start putting it all back together again. What I will end up with a a 310,000 mile car with a ground up restoration from the fire wall forward, and an unrestored back two thirds!
Photo of today's progress: (suspension coated in POR15 and Black Cote, Superflex bushings, rebuilt shocks)
- Attachments
-
- MGB Front Suspension Rebuild
- mgbfrontsuspension.jpg (78.02 KiB) Viewed 34983 times
-
- Core Member
- Posts: 440
- Joined: Tue Sep 04, 2007 10:33 am
- Location: LAX
- Contact:
-
- Active Member
- Posts: 261
- Joined: Mon Dec 04, 2006 9:14 pm
- Vehicles Owned: 38 MG SA
47 MG TC
50 Renault 4CV
67 Triumph Spitfire
88 Toyota MR2 - Location: Van Nuys
Re: What is your current project?
My excuse for avoiding real work is a 67 Spitfire. Got it because someone wanted to clear their yard. Just been sitting in my back yard for years, but I recenly decided I would like a 65 LeMans Spitfire. (some of you have cool looking race replicas- you know who) 65 LeMans Spitfire had a fiberglass roof molded from a GT6. I was not going to make a fiberglass mold; but I found someone making a Spit6 who had a GT6 with rotted sills(common). My Spit has good sills, but mangled rear bumper, so- sounds like an excuse to try a new MIG welder. After way too much fun hacking and welding it is very solid- all steel roof, windscreen welded in, rear hatch welded in and filled. Faired in headlights. Hope to get some paint soon
gene olson
47 MG TC
38MG SA
gene olson
47 MG TC
38MG SA
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
Re: What is your current project?
Hey, that looks pretty good!
I think we need a "Vintage Motoring Project Tour". We can drive around to everyone's house or shop and see the latest updates.
![Thumbs Up :thumbs:](./images/smilies/icon_thumbsup.gif)
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
Peerless Restoration
I suppose I should also list some other projects I'm working on right now.....
1. MGA - rebuild master and slave cylinders, convert to 1600 front disc brakes, replace suspension bushings.
2. MG TC - rebuild entire braking system and renew all hoses, pipes, linings, etc. This project has been ongoing because I'm having problems with the brakes not releasing properly. The highlight of the job was having new brake flare nuts fabricated from scratch in stainless with correct whitworth flats, and sourcing proper stainless protective coil for my hand-made pipes. The whole project came out to a fraction of the cost of buying the stuff done, and in far superior quality. Here is a photo of one completed brake line next to an original, and one of the new Alfin brake drums.
1. MGA - rebuild master and slave cylinders, convert to 1600 front disc brakes, replace suspension bushings.
2. MG TC - rebuild entire braking system and renew all hoses, pipes, linings, etc. This project has been ongoing because I'm having problems with the brakes not releasing properly. The highlight of the job was having new brake flare nuts fabricated from scratch in stainless with correct whitworth flats, and sourcing proper stainless protective coil for my hand-made pipes. The whole project came out to a fraction of the cost of buying the stuff done, and in far superior quality. Here is a photo of one completed brake line next to an original, and one of the new Alfin brake drums.
- Attachments
-
- MG TC brake lines
- nuts.jpg (16.59 KiB) Viewed 35046 times
-
- MG TC Alfin brake drums
- alfin.jpg (22.57 KiB) Viewed 35045 times
- Jimmy
- Don't take him seriously!
- Posts: 1434
- Joined: Tue May 26, 2009 7:25 pm
- Vehicles Owned: '74-1/2 MGB
'76 MGB (parts car)
'52 TD
'71 MGB staqtion wagon
'69 MGB (parts car)
'60 Sprite
'79 MG Midget (parts car)
'63 LBC
Plus, a Turbo S (with a damn roof) in the household.
And three Mercedes on 20" wheels. - Location: NM
Re: What's Your Latest Project?
For this winter's project, I've contemplated freshening up the TD's steering wheel a bit.
- Attachments
-
- Or, I could get gloves...
- IMG_1519.jpg (37 KiB) Viewed 34943 times
In baseball, running into someone is apparently a "collision".
But doing the same thing in a car somehow makes it an "accident".
But doing the same thing in a car somehow makes it an "accident".
- Larry Kluss
- Veteran Member
- Posts: 1088
- Joined: Wed Jul 25, 2007 12:28 pm
- Vehicles Owned: -
1967 MGB (Works tribute)
1968 E-type Jaguar FHC
1974 Chevy Nova SS (faux)
2000 Ford Ranger XLT
2008 Jaguar XJ L - Location: Conejo Valley
Re: What's Your Latest Project?
And here I thought the wheel in Dean's Peerless GT was in bad shape...you get the prize for sadest steering wheel, Jimmy.Jimmy wrote:For this winter's project, I've contemplated freshening up the TD's steering wheel a bit.
- Jimmy
- Don't take him seriously!
- Posts: 1434
- Joined: Tue May 26, 2009 7:25 pm
- Vehicles Owned: '74-1/2 MGB
'76 MGB (parts car)
'52 TD
'71 MGB staqtion wagon
'69 MGB (parts car)
'60 Sprite
'79 MG Midget (parts car)
'63 LBC
Plus, a Turbo S (with a damn roof) in the household.
And three Mercedes on 20" wheels. - Location: NM
Re: What's Your Latest Project?
I'm afraid I also qualify for Most Abusive Use of Garage Space award.Larry Kluss wrote:And here I thought the wheel in Dean's Peerless GT was in bad shape...you get the prize for sadest steering wheel, Jimmy.Jimmy wrote:For this winter's project, I've contemplated freshening up the TD's steering wheel a bit.
In baseball, running into someone is apparently a "collision".
But doing the same thing in a car somehow makes it an "accident".
But doing the same thing in a car somehow makes it an "accident".
- Larry Kluss
- Veteran Member
- Posts: 1088
- Joined: Wed Jul 25, 2007 12:28 pm
- Vehicles Owned: -
1967 MGB (Works tribute)
1968 E-type Jaguar FHC
1974 Chevy Nova SS (faux)
2000 Ford Ranger XLT
2008 Jaguar XJ L - Location: Conejo Valley
Re: What's Your Latest Project?
Okay, where are those projects??? We've seen some good ones so far...some updates on those might be in order (hint, hint). Let's see some new postings from others as well...
My hope is that this may inspire other members to start or finish some projects on their own classic cars. I, for one, think it's interesting to see what others are working on. Don't be shy, post your small projects too...even detailing your engine compartment over the weekend with before and after shots.
I'll get an updated photo or two on my E-type project posted this weekend.
My hope is that this may inspire other members to start or finish some projects on their own classic cars. I, for one, think it's interesting to see what others are working on. Don't be shy, post your small projects too...even detailing your engine compartment over the weekend with before and after shots.
I'll get an updated photo or two on my E-type project posted this weekend.
-
- Active Member
- Posts: 275
- Joined: Fri Jun 27, 2008 9:07 am
- Location: SoCal
Re: What's Your Latest Project?
Wow guys - the Jag and Lotus look fantastic.
These are in a very different rung than those, but I rotated the fleet some last month...
![Image](http://i207.photobucket.com/albums/bb73/tdskip_photos/1966%20TR4A%20Solid%20Axle/1966TR4Asolidaxleasbought7-23-10.jpg)
![Image](http://i207.photobucket.com/albums/bb73/tdskip_photos/Fiat/IMG01257-20100719-1811.jpg)
![Image](http://i207.photobucket.com/albums/bb73/tdskip_photos/Capri/DSCN4568.jpg)
These are in a very different rung than those, but I rotated the fleet some last month...
![Image](http://i207.photobucket.com/albums/bb73/tdskip_photos/1966%20TR4A%20Solid%20Axle/1966TR4Asolidaxleasbought7-23-10.jpg)
![Image](http://i207.photobucket.com/albums/bb73/tdskip_photos/Fiat/IMG01257-20100719-1811.jpg)
![Image](http://i207.photobucket.com/albums/bb73/tdskip_photos/Capri/DSCN4568.jpg)
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
Re: What's Your Latest Project?
I'm seeing lots of cars lately that haven't been posted in the "Post a picture of your ride" thread. The gallery needs filling!
-
- Active Member
- Posts: 275
- Joined: Fri Jun 27, 2008 9:07 am
- Location: SoCal
Re: What's Your Latest Project?
OK, OK.....
- VWNate1
- Veteran Member
- Posts: 1402
- Joined: Sat Sep 05, 2009 7:41 am
- Vehicles Owned: LBC's
Mercedes Diesels OM 616 & 617
1969 Chevrolet C/10 pickup shop truck
250 I-6 , TH350 slushbox
1959 Nash Metropolitan FH Sports Coupe
1961 Morris Minor W/ 1973 1275 CC engine & gearbox
Ural Solo Motos , old Honda 90 CC Tiddlers - Location: Sunny So. Cal. , land of fruits , nuts & flakes
Re: To-Day's Project
Was to work on my new Moto , replaced the rectifier , (made up new harness , modified it fit the frame etc.) , adjusted the valves (were @ zero clearance & I bought it from a DEALER) , & clutch , some other piddly stuff I now forget , took it for a test ride to the gas station then to Mar-Vac for more rectifiers , ($5.0 each and wonderful for old Motos) and then home again where SWMBO grabbed me before I could pass out on the sofa , this cold is kicking my butt .
It's nice to have a running Moto agan , I was getting a bit frantic there
.
It's nice to have a running Moto agan , I was getting a bit frantic there
![Bow :bow:](./images/smilies/bow.gif)
-Nate
-
- Active Member
- Posts: 5
- Joined: Sat Nov 14, 2009 6:54 pm
- Vehicles Owned: By Age
1953 MGTD
1965 MGB (in pieces)
1973 MGBGT
1973 Triumoh TR6
1974 MG Midget
1979 MGB x 2
Re: What's Your Latest Project?
Here is the new addition to our family. Some assembly required, but all in all, a good start. I'm the third owner. Second owner bought it in '65 for $150. This was a divorce settlement deal, so the car was apparaised in it's present state. The gal put the price at $8200 and some change. I find this hard to fathom myself.....22 boxes of parts, plus the big stuff. Original 948 motor is rebuit from 1985, .020 over, new seats , complete carpet kit, and a few other things.
Paint is spectacular, a little dirty from sitting for 25+ years inside. I've tried to resize the file, not real sure how this will show up.
Paint is spectacular, a little dirty from sitting for 25+ years inside. I've tried to resize the file, not real sure how this will show up.
- Attachments
-
- DSCF0328.jpg (85.51 KiB) Viewed 34594 times
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
Re: What's Your Latest Project?
Fantastic, Brad!
I hope you start a restoration thread so we can follow the progress. ![Smile :)](./images/smilies/icon_smile.gif)
![Thumbs Up :thumbs:](./images/smilies/icon_thumbsup.gif)
![Smile :)](./images/smilies/icon_smile.gif)
-
- Active Member
- Posts: 2
- Joined: Wed May 28, 2014 5:17 pm
Re: What is your current project?
If any of you have any interest in posting your projects (complete or in-progress) on my site, please lmk by submitting them by email. You guys have some great cars, how about sharing their stories? Hope this isn't considered spam, I'm truly a vintage car enthusiast! ![Smile :)](./images/smilies/icon_smile.gif)
David
www.CarBuildIndex.com
![Smile :)](./images/smilies/icon_smile.gif)
David
www.CarBuildIndex.com
-
- Active Member
- Posts: 2
- Joined: Thu Jan 28, 2016 9:34 am
- Vehicles Owned: 1949 MG TC
1953 F-100
2001 MUSTANG COBRA - Location: Ventura, CA
- Contact:
Re: What is your current project?
Currently working on my MG TC braking system, suspension system, steering system, interior (owned for 41 years, so everything needs a little attention) and sealing up the rear axle tubes so they will cease to leak on the rear brakes (bought the SERIOUS kit from "Frame-Up restoration). Finished making new floor boards, installing new rubbers in the shock links, rebuilding the master and slave cylinders, cleaning and resealing the gas tank. installing the new link rubbers (but I am still thinking about replacing them with modern bushings) and sanded, repainted, & rebalanced the three rear wheels (using glass beads, instead of lead weights). While I am doing the front, just like the rear brakes, I will remove, media blast, prime and paint the front backing plates, rebuild the wheel cylinders and replace the flexible brake lines.
I should finish up the rear axle work this week, and can move on to the Front brakes, etc. Then I should move on to the steering system (I installed the Thompson Kit when it came out many many years ago). Now I seem to have a "flat spot" probably in the "worm gear"; but I will have to disassemble it to find out.
And Steve Simmons (I'm a ghost member ot TC MOTORING GUILD because I live in Ventura, and it's a long way to go for monthly meetings. I would like to know where you got your NEW CORRECT brake lines. Any way I would like to get new lines made, especially since the ones I looked at at MOSS MOTORS had been bent in half (apparently for easier or cheaper shipping).
When I retired I built my own "car shop" complete with 4-post lift, so it's much easier to do most jobs and a whole lot safer than having to work while the car is on jack stands; also a lot easier to change the oil, etc.
I should finish up the rear axle work this week, and can move on to the Front brakes, etc. Then I should move on to the steering system (I installed the Thompson Kit when it came out many many years ago). Now I seem to have a "flat spot" probably in the "worm gear"; but I will have to disassemble it to find out.
And Steve Simmons (I'm a ghost member ot TC MOTORING GUILD because I live in Ventura, and it's a long way to go for monthly meetings. I would like to know where you got your NEW CORRECT brake lines. Any way I would like to get new lines made, especially since the ones I looked at at MOSS MOTORS had been bent in half (apparently for easier or cheaper shipping).
When I retired I built my own "car shop" complete with 4-post lift, so it's much easier to do most jobs and a whole lot safer than having to work while the car is on jack stands; also a lot easier to change the oil, etc.
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
Re: What is your current project?
Hey, I know those initials. Welcome! There's a meeting tomorrow night with a great program on the Pebble Beach Road Races. You should try to make it. I plan to be there in the TC. I'm not far from you actually, just up the hill in T.O.
I installed Grunau rear axles with new hubs pre-installed, along with permanently sealed bearings, etc. In the past ten years not a drop have leaked. That, and I never worry about snapping an axle. Some of the best money I ever spent on the car.
Those shock links are a pain. The Moss tool kit helps but it's still tricky. And while you're into the front end, check the king pins. Reducing play here seems to make a difference in straight-line stability. And if you have the knuckles off, check that axle for alignment. Mine was straight but many people have reported theirs was out of spec after all the years of abuse. I went a step farther and sent the knuckles to Grunau to have oversized, stronger spindles installed. The originals have been known to crack and break on occasion and my car had an unknown history. Nice peace of mind having brand new, uprated ones in there. But now we're into the "might as wells". Dangerous (and expensive) territory!
I made my own brake lines using Cunifer tubing. Stainless steel coil was sourced in the UK, and the stainless steel flare nuts were custom-made by my machinist. The nuts are not original, being stainless and having larger wrench flats, but I consider this a practical upgrade to make maintenance easier in the future. I may be having more sets of nuts made up in the near future in case you need some.
I installed Grunau rear axles with new hubs pre-installed, along with permanently sealed bearings, etc. In the past ten years not a drop have leaked. That, and I never worry about snapping an axle. Some of the best money I ever spent on the car.
Those shock links are a pain. The Moss tool kit helps but it's still tricky. And while you're into the front end, check the king pins. Reducing play here seems to make a difference in straight-line stability. And if you have the knuckles off, check that axle for alignment. Mine was straight but many people have reported theirs was out of spec after all the years of abuse. I went a step farther and sent the knuckles to Grunau to have oversized, stronger spindles installed. The originals have been known to crack and break on occasion and my car had an unknown history. Nice peace of mind having brand new, uprated ones in there. But now we're into the "might as wells". Dangerous (and expensive) territory!
I made my own brake lines using Cunifer tubing. Stainless steel coil was sourced in the UK, and the stainless steel flare nuts were custom-made by my machinist. The nuts are not original, being stainless and having larger wrench flats, but I consider this a practical upgrade to make maintenance easier in the future. I may be having more sets of nuts made up in the near future in case you need some.
- VWNate1
- Veteran Member
- Posts: 1402
- Joined: Sat Sep 05, 2009 7:41 am
- Vehicles Owned: LBC's
Mercedes Diesels OM 616 & 617
1969 Chevrolet C/10 pickup shop truck
250 I-6 , TH350 slushbox
1959 Nash Metropolitan FH Sports Coupe
1961 Morris Minor W/ 1973 1275 CC engine & gearbox
Ural Solo Motos , old Honda 90 CC Tiddlers - Location: Sunny So. Cal. , land of fruits , nuts & flakes
Re: What is your current project?
5.5.2016
Wow ~
Long time no updates , I see some really nice cars in here and would love to hear the progress .
My back yard is full of junk stalled projects , I retire next week and hope to get back to them
.
Wow ~
Long time no updates , I see some really nice cars in here and would love to hear the progress .
My back yard is full of junk stalled projects , I retire next week and hope to get back to them
![Thumbs Up :thumbs:](./images/smilies/icon_thumbsup.gif)
-Nate
-
- Active Member
- Posts: 2
- Joined: Thu Jan 28, 2016 9:34 am
- Vehicles Owned: 1949 MG TC
1953 F-100
2001 MUSTANG COBRA - Location: Ventura, CA
- Contact:
Re: What is your current project?
Steve Simmons;
I can promise you there are a lot of us who would love to update their brake tubing; but who can NOT find a source for those ends. I for one would be very interested; especially if they were designed to use American stainless steel tubing although I suppose you could simply drill out the inside of each to a size matching the American stainless tubing. If your "machinest wants to make some money he could offer to supply them to people like "From the Frame Up", "Moss" and "Abington Spares". Please let me know when and if they become available.
I can promise you there are a lot of us who would love to update their brake tubing; but who can NOT find a source for those ends. I for one would be very interested; especially if they were designed to use American stainless steel tubing although I suppose you could simply drill out the inside of each to a size matching the American stainless tubing. If your "machinest wants to make some money he could offer to supply them to people like "From the Frame Up", "Moss" and "Abington Spares". Please let me know when and if they become available.
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
Re: What is your current project?
My machinist is the one who makes most of the hardware for From the Frame Up. I introduced Doug (the owner) to him several years ago. For those who grew up in So Cal, you may remember Mike Goodman also. This was Mike's machinist back in the day. He's retired now and just does small jobs out of his garage.
Back on topic, my latest projects are numerous (see my tractor restoration thread for one of them) but one small side track has been this old oil pump. I've just about finished the top part so the tank will be next. Still need to replace the knob(s) and I got the white completely wrong. Needs to be more of an ivory color.
Back on topic, my latest projects are numerous (see my tractor restoration thread for one of them) but one small side track has been this old oil pump. I've just about finished the top part so the tank will be next. Still need to replace the knob(s) and I got the white completely wrong. Needs to be more of an ivory color.
- Attachments
-
- pump-before.jpg (104.11 KiB) Viewed 30130 times
-
- pump.jpg (46.12 KiB) Viewed 30130 times
- VWNate1
- Veteran Member
- Posts: 1402
- Joined: Sat Sep 05, 2009 7:41 am
- Vehicles Owned: LBC's
Mercedes Diesels OM 616 & 617
1969 Chevrolet C/10 pickup shop truck
250 I-6 , TH350 slushbox
1959 Nash Metropolitan FH Sports Coupe
1961 Morris Minor W/ 1973 1275 CC engine & gearbox
Ural Solo Motos , old Honda 90 CC Tiddlers - Location: Sunny So. Cal. , land of fruits , nuts & flakes
Re: What is your current project?
Jeeze ~
I had an oil tank like that in my VW Shop 30 + years ago .
It was green , I no longer remember the brand of bulk oil we bought to fill it .
I do remember the day one of their Outside Salesmen came by , walked right into our Shop and slapped a serial number decal on it , my partner asked what the hell he thought he was doing and the Salesman smarmly said ' that's _OUR_ property and we want to keep track of it .
Partner ripped the decal off and said come back here again and you'll leave in a stretcher , that's ours , you didn't provide it ! .
I had an oil tank like that in my VW Shop 30 + years ago .
It was green , I no longer remember the brand of bulk oil we bought to fill it .
I do remember the day one of their Outside Salesmen came by , walked right into our Shop and slapped a serial number decal on it , my partner asked what the hell he thought he was doing and the Salesman smarmly said ' that's _OUR_ property and we want to keep track of it .
Partner ripped the decal off and said come back here again and you'll leave in a stretcher , that's ours , you didn't provide it ! .
-Nate