Lotus Europa Restoration

Post your car-related project and restoration stories here!
Post Reply
User avatar
HealeyBN7
Core Member
Posts: 856
Joined: Mon Jul 30, 2007 6:33 pm
Vehicles Owned: 1959 Peerless GT
1960 Austin Healey 3000
1961 Warwick GT
1971 Lotus Europa
1995 Range Rover
Location: Not Thousand Oaks CA

Lotus Europa Restoration

Post by HealeyBN7 »

Turn away if you would rather be driving than wrenching...


small lotus on barn.JPG
sanding and glassing.JPG
cutting holes.JPG
Attachments
lotus hanging front.JPG
User avatar
Steve Simmons
Site Admin
Posts: 4106
Joined: Thu Sep 07, 2006 9:45 pm
Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS
Location: Co-Nay-Ho Valley
Contact:

Re: What's Your Latest Project?

Post by Steve Simmons »

Oh yeah! Work commences in the new garage! :D

I love seeing other people wrenching. :)
User avatar
malcolmr18zoy
Core Member
Posts: 719
Joined: Sun Jul 05, 2009 2:18 pm
Vehicles Owned: 1959 MGA 1600 Coupe
1949 MG TC
1965 Jaguar 3.8S
1966 MGB GT
1964 MG Midget
1985 BMW 528i
1990 Jaguar XJS V12 convertible
1995 Landrover Discovery
2003 BMW 325i wagon.(wife's car)
Location: Big Bear City, CA

Re: What's Your Latest Project?

Post by malcolmr18zoy »

Wow!! that looks just fantastic. Great looking project, and great looking workshop. Now I understand all your comments about rubbing down the Lotus.
Malcolm
User avatar
TEAM ROSBIF
Active Member
Posts: 284
Joined: Sat Jun 14, 2008 11:41 am

Re: What's Your Latest Project?

Post by TEAM ROSBIF »

fanatstic garage, you may remember I told everyone of a similar car here in Topanga, I think it has the renault engine.
Whole project is lying in pieces.
wish I had a decent garage!! :roll:

Mark
WORKS MGA TWIN CAM YD1
User avatar
gorms68
Core Member
Posts: 678
Joined: Sat Jul 26, 2008 8:10 pm
Vehicles Owned: 1914 Chandler model 15
1929 Chandler model 65
1966 MGB roadster
1968 Mustang Dlx coupe
Location: Monrovia

Re: What's Your Latest Project?

Post by gorms68 »

Wow! Who needs a house with a garage like that.
Chris Gorman
User avatar
Jimmy
Don't take him seriously!
Posts: 1434
Joined: Tue May 26, 2009 7:25 pm
Vehicles Owned: '74-1/2 MGB
'76 MGB (parts car)
'52 TD
'71 MGB staqtion wagon
'69 MGB (parts car)
'60 Sprite
'79 MG Midget (parts car)
'63 LBC
Plus, a Turbo S (with a damn roof) in the household.
And three Mercedes on 20" wheels.
Location: NM

Re: What's Your Latest Project?

Post by Jimmy »

HealeyBN7 wrote:Turn away if you would rather be driving than wrenching...
It's too bad that Steve can't enjoy working on cars like you're doing, Dean.
That looks like FUN.
And unlike Steve's USDA approved garage floor, yours has evidence of someone actually having used it.
Great shop.
In baseball, running into someone is apparently a "collision".
But doing the same thing in a car somehow makes it an "accident".
User avatar
Steve Simmons
Site Admin
Posts: 4106
Joined: Thu Sep 07, 2006 9:45 pm
Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS
Location: Co-Nay-Ho Valley
Contact:

Re: What's Your Latest Project?

Post by Steve Simmons »

Actually, Dean's floor is brand new. He coated it with clear instead of gray. Mine has far more "battle scars" than his!

Jimmy, come on over if you want to have some fun. I have three cars in various states of repair and restoration. Just because I enjoy driving more than wrenching doesn't mean I don't like wrenching. I just prefer to do it on my own time rather than when something breaks unexpectedly.
User avatar
Jimmy
Don't take him seriously!
Posts: 1434
Joined: Tue May 26, 2009 7:25 pm
Vehicles Owned: '74-1/2 MGB
'76 MGB (parts car)
'52 TD
'71 MGB staqtion wagon
'69 MGB (parts car)
'60 Sprite
'79 MG Midget (parts car)
'63 LBC
Plus, a Turbo S (with a damn roof) in the household.
And three Mercedes on 20" wheels.
Location: NM

Re: What's Your Latest Project?

Post by Jimmy »

Oh no, I won't.
Just because you have an anti-bacterial garage floor that doesn't mean I want your cold. Heck, I'm still not up to speed after mine.
But if you can wait a few weeks (I'm leaving town for a while) I wouldn't mind helping you out. It could be fun.
At least more fun than changing the clutch in Annette's B, doing an engine and tranny swap on a Suburban, or building a receiver for the Peterbilt.
But perhaps not as fun as getting my TD running, putting an oil cooler and filter in the V8 car, or making a "stow-away" version of a late model MGB top frame.
All that aside, root beer does not count as beer when working on cars.
In baseball, running into someone is apparently a "collision".
But doing the same thing in a car somehow makes it an "accident".
User avatar
Steve Simmons
Site Admin
Posts: 4106
Joined: Thu Sep 07, 2006 9:45 pm
Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS
Location: Co-Nay-Ho Valley
Contact:

Re: What's Your Latest Project?

Post by Steve Simmons »

Late model stowaway? Why not just use the one the factory offered? They have more head room, too.
User avatar
Jimmy
Don't take him seriously!
Posts: 1434
Joined: Tue May 26, 2009 7:25 pm
Vehicles Owned: '74-1/2 MGB
'76 MGB (parts car)
'52 TD
'71 MGB staqtion wagon
'69 MGB (parts car)
'60 Sprite
'79 MG Midget (parts car)
'63 LBC
Plus, a Turbo S (with a damn roof) in the household.
And three Mercedes on 20" wheels.
Location: NM

Re: What's Your Latest Project?

Post by Jimmy »

'Cause I don't want to deal with the "erector set" - especially if the top needs to go up in a hurry.
Also, I'd rather keep the trunk available for other stuff.
Basically, I will end up with a regular folding frame, but which lifts off without tools and can stay at home for the most part.
I'll practice on the Beater B, then make one for the V8 car. If I ever find a nice enough "gray" top frame, that is.
In baseball, running into someone is apparently a "collision".
But doing the same thing in a car somehow makes it an "accident".
User avatar
Larry Kluss
Veteran Member
Posts: 1087
Joined: Wed Jul 25, 2007 12:28 pm
Vehicles Owned: -
1967 MGB (Works tribute)
1968 E-type Jaguar FHC
1974 Chevy Nova SS (faux)
2000 Ford Ranger XLT
2008 Jaguar XJ L
Location: Conejo Valley

Re: What's Your Latest Project?

Post by Larry Kluss »

Looking good, Dean! Nice to see your great new garage being used for some real dirty work. Although, I don't envy all the sanding and fiberglass dust...been there, done that.
User avatar
Steve Simmons
Site Admin
Posts: 4106
Joined: Thu Sep 07, 2006 9:45 pm
Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS
Location: Co-Nay-Ho Valley
Contact:

Re: What's Your Latest Project?

Post by Steve Simmons »

Jimmy, I believe late frames are all black. I know early folding frames were gray because I have one here from my '65. So what you're after then isn't really a stowaway frame, but a more easily removable fixed frame. You know it's only six screws to remove and install the frame, right? I guess you could cut off the mounting flange and weld on a metal tab instead, and then you could install and remove the same way the stowaway does.
User avatar
Jimmy
Don't take him seriously!
Posts: 1434
Joined: Tue May 26, 2009 7:25 pm
Vehicles Owned: '74-1/2 MGB
'76 MGB (parts car)
'52 TD
'71 MGB staqtion wagon
'69 MGB (parts car)
'60 Sprite
'79 MG Midget (parts car)
'63 LBC
Plus, a Turbo S (with a damn roof) in the household.
And three Mercedes on 20" wheels.
Location: NM

Re: What's Your Latest Project?

Post by Jimmy »

Right you are, Steve...the late frames are black. Except the one on the Beater B which I painted gray, so at least it reminds me of an earlier folding frame.
On the V8er I will have to use a gray frame, as the late/black ones claim common territory with the seats. Or the stow-away and top I have - and don't like.
While it may only be three screws per side, I'd really rather leave them put, for a number of reasons. This happens to be one where I'm in complete agreement with you - I'd rather drive than wrench on top frames.
About the only drawback I can see with a lift-off, folding top is that when I roll the car the top will probably come off. Unless, of course, for some odd reason I used bad judgement and drove with it up.
Either way, I'll have other problems at that point.
And lopping off the triangular part where the screws go and welding a tab onto the structure is exactly what I had in mind. Just not in that order.
In baseball, running into someone is apparently a "collision".
But doing the same thing in a car somehow makes it an "accident".
User avatar
Steve Simmons
Site Admin
Posts: 4106
Joined: Thu Sep 07, 2006 9:45 pm
Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS
Location: Co-Nay-Ho Valley
Contact:

Re: What's Your Latest Project?

Post by Steve Simmons »

One last thought before we completely steal this thread, if you're just going to leave it in the garage anyway, then why not use the factory stowaway top but not break it down? You can easily pin the two halves together and sew the top to the frame, just like folding frames. The only difference then would be lack of the pieces between the header rail and main bows, and the fact that it lifts off. Just a thought.
User avatar
malcolmr18zoy
Core Member
Posts: 719
Joined: Sun Jul 05, 2009 2:18 pm
Vehicles Owned: 1959 MGA 1600 Coupe
1949 MG TC
1965 Jaguar 3.8S
1966 MGB GT
1964 MG Midget
1985 BMW 528i
1990 Jaguar XJS V12 convertible
1995 Landrover Discovery
2003 BMW 325i wagon.(wife's car)
Location: Big Bear City, CA

Re: What's Your Latest Project?

Post by malcolmr18zoy »

Hey Jimmy,
Why don't you just install a really good hard top? Then you could pretend that you have a proper car. No more having to agonize over what kind of temporary top to have. Your car would probably be faster, more comfortable on a long journey, and more secure. If you really have to have open air motoring, then do the job properly, and get a sport bike.That way you can have performance as well as open air motoring.
Malcolm
User avatar
Jimmy
Don't take him seriously!
Posts: 1434
Joined: Tue May 26, 2009 7:25 pm
Vehicles Owned: '74-1/2 MGB
'76 MGB (parts car)
'52 TD
'71 MGB staqtion wagon
'69 MGB (parts car)
'60 Sprite
'79 MG Midget (parts car)
'63 LBC
Plus, a Turbo S (with a damn roof) in the household.
And three Mercedes on 20" wheels.
Location: NM

Re: What's Your Latest Project?

Post by Jimmy »

Nah, it's not to be a "garage top". Or tops.
On the contrary, actually. I plan on some relatively long distance trips with the V8 car (perhaps cross country), so having an easily useable top along would be most handy. But, for around here, the top can stay in the garage for the most part.
With the Beater B, it'll largely be practice so that I can do a better job with the other top. And it'd also provide the same easy-on, easy-off convenience which I crave.
As you might have guessed by now, I really don't like roofs, but since there are times when they are practical (parking in the rain, driving in snow storms, etc.) I'd like to have the option without always having the extra weight of the top along.
Wanna trade your gray frame for a like new, gold anodized stow away? Have a pristine tan Robbins canvas top for it, too.
In baseball, running into someone is apparently a "collision".
But doing the same thing in a car somehow makes it an "accident".
User avatar
Jimmy
Don't take him seriously!
Posts: 1434
Joined: Tue May 26, 2009 7:25 pm
Vehicles Owned: '74-1/2 MGB
'76 MGB (parts car)
'52 TD
'71 MGB staqtion wagon
'69 MGB (parts car)
'60 Sprite
'79 MG Midget (parts car)
'63 LBC
Plus, a Turbo S (with a damn roof) in the household.
And three Mercedes on 20" wheels.
Location: NM

Re: What's Your Latest Project?

Post by Jimmy »

malcolmr18zoy wrote:Hey Jimmy,
Why don't you just install a really good hard top?
Malcolm
I tried that approach, using your OE MGB hardtop that you left here several months ago, but by the time I had it folded up to the point it would fit in the trunk, I could never get it to seal or look quite right as a hardtop again.
But don't worry...it's nothing a little expert fiberglass repair couldn't fix, and as you know, the windows were already shot, anyway.
In baseball, running into someone is apparently a "collision".
But doing the same thing in a car somehow makes it an "accident".
User avatar
Steve Simmons
Site Admin
Posts: 4106
Joined: Thu Sep 07, 2006 9:45 pm
Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS
Location: Co-Nay-Ho Valley
Contact:

Re: What's Your Latest Project?

Post by Steve Simmons »

You aren't planning to put a full frame top in the trunk are you? I seriously doubt it would fit. Unless I'm mistaken, it needs to break down, as the factory stowaways did.

I never planned to get rid of my original frame because it's original to the car, but I might be persuaded to make a trade for a stowaway. My folding frame is powder coated semigloss black so it isn't 100% original but it does look nice. We'll talk.
User avatar
Jimmy
Don't take him seriously!
Posts: 1434
Joined: Tue May 26, 2009 7:25 pm
Vehicles Owned: '74-1/2 MGB
'76 MGB (parts car)
'52 TD
'71 MGB staqtion wagon
'69 MGB (parts car)
'60 Sprite
'79 MG Midget (parts car)
'63 LBC
Plus, a Turbo S (with a damn roof) in the household.
And three Mercedes on 20" wheels.
Location: NM

Re: What's Your Latest Project?

Post by Jimmy »

No, when the top's along for the ride, it'll sit in its normal position behind the seats. The only real difference will be that the top will stay in the garage most of the time once it's easily removed.
If you got your voice back, sure, let's talk frame/top swapping options.
In baseball, running into someone is apparently a "collision".
But doing the same thing in a car somehow makes it an "accident".
User avatar
HealeyBN7
Core Member
Posts: 856
Joined: Mon Jul 30, 2007 6:33 pm
Vehicles Owned: 1959 Peerless GT
1960 Austin Healey 3000
1961 Warwick GT
1971 Lotus Europa
1995 Range Rover
Location: Not Thousand Oaks CA

Re: What's Your Latest Project?

Post by HealeyBN7 »

Surf's up - borrowed Larry's long board and took off most of the poly primer.

Lots and lots of detail sanding still ahead. I figure about six more months...
Longboarding.jpg
User avatar
TEAM ROSBIF
Active Member
Posts: 284
Joined: Sat Jun 14, 2008 11:41 am

Re: What's Your Latest Project?

Post by TEAM ROSBIF »

wow that looks fantastic, just as a pure shape very beautiful, very James Bond I think.
Looks like you have done a great job.

Mark
WORKS MGA TWIN CAM YD1
User avatar
Steve Simmons
Site Admin
Posts: 4106
Joined: Thu Sep 07, 2006 9:45 pm
Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS
Location: Co-Nay-Ho Valley
Contact:

Re: What's Your Latest Project?

Post by Steve Simmons »

I just love seeing that new garage in action! :thumbs:
User avatar
Larry Kluss
Veteran Member
Posts: 1087
Joined: Wed Jul 25, 2007 12:28 pm
Vehicles Owned: -
1967 MGB (Works tribute)
1968 E-type Jaguar FHC
1974 Chevy Nova SS (faux)
2000 Ford Ranger XLT
2008 Jaguar XJ L
Location: Conejo Valley

Re: What's Your Latest Project?

Post by Larry Kluss »

Saw Dean's project on Saturday and, despite what he says, it's coming along at a nice pace.

Remember to use a mask and baby powder on expose skin areas to help keep the glass fibers at bay.
User avatar
HealeyBN7
Core Member
Posts: 856
Joined: Mon Jul 30, 2007 6:33 pm
Vehicles Owned: 1959 Peerless GT
1960 Austin Healey 3000
1961 Warwick GT
1971 Lotus Europa
1995 Range Rover
Location: Not Thousand Oaks CA

Re: What's Your Latest Project?

Post by HealeyBN7 »

Larry Kluss wrote: Remember to use a mask and baby powder on expose skin areas to help keep the glass fibers at bay.
Thanks for the baby powder tip. I did not know that and would never have guessed it would work. I am still not sure. Thankfully I am rounding the corner on the glass work. It's hard to believe this project consumed almost 50 sq feet of glass.

Hope to shoot another coat of primer tomorrow then start with a real guide coat. Good thing I have to go to the office now and again, my arms are sore from all the sanding.

Dean
User avatar
Larry Kluss
Veteran Member
Posts: 1087
Joined: Wed Jul 25, 2007 12:28 pm
Vehicles Owned: -
1967 MGB (Works tribute)
1968 E-type Jaguar FHC
1974 Chevy Nova SS (faux)
2000 Ford Ranger XLT
2008 Jaguar XJ L
Location: Conejo Valley

Re: What's Your Latest Project?

Post by Larry Kluss »

HealeyBN7 wrote:...Good thing I have to go to the office now and again, my arms are sore from all the sanding.

Dean
Been there, done that. Have fun! :lol:
Post Reply