'66 B progress update
- gorms68
- Core Member
- Posts: 678
- Joined: Sat Jul 26, 2008 8:10 pm
- Vehicles Owned: 1914 Chandler model 15
1929 Chandler model 65
1966 MGB roadster
1968 Mustang Dlx coupe - Location: Monrovia
'66 B progress update
The next project I finished was making the torsion spring that broke on the door lock lever. Found some music wire at a local hobby shop and after a few practice runs made a spring that closely resembles the original.
The wiring on the car is about half way done. All the wiring on the car is complete outside the passenger's compartment. The engine compartment, underside, and boot, are all done. I am using the Advance Autowire harness and Painless Powerbraid to make it blend with the rest of the car. I am real happy with the way it looks so far. The dash is my next project.
I also have all the bumpers on now. Only the bonnet is left to install now. Progress is good!
- Attachments
-
- 1.jpg (60.33 KiB) Viewed 38791 times
-
- 2.jpg (68.46 KiB) Viewed 38791 times
Chris Gorman
-
- Active Member
- Posts: 275
- Joined: Fri Jun 27, 2008 9:07 am
- Location: SoCal
Re: '66 B progress update
Nice work Chris - she looks great.
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
Re: '66 B progress update
Boy oh boy, I can hear the engine rumble already! ![Bow :bow:](./images/smilies/bow.gif)
![Bow :bow:](./images/smilies/bow.gif)
- Larry Kluss
- Veteran Member
- Posts: 1088
- Joined: Wed Jul 25, 2007 12:28 pm
- Vehicles Owned: -
1967 MGB (Works tribute)
1968 E-type Jaguar FHC
1974 Chevy Nova SS (faux)
2000 Ford Ranger XLT
2008 Jaguar XJ L - Location: Conejo Valley
Re: '66 B progress update
Wow, it's looking terrific, Chris. I hear you on the windshield, it is a pain in the...
- CJ Steak
- Active Member
- Posts: 171
- Joined: Mon May 10, 2010 6:01 pm
- Vehicles Owned: Present cars of interest:
1958 Studebaker Commander 2D HT
1962 Willys Pickup 4x4
1967 MGB GT
Prior cars of interest:
1927 Ford Model T
1949 Willys CJ2A< Miss this the most!
1953 Ford F100
1954 Ford F500
1962 Triumph Herald
1964 AMC Typhoon 2D HT
1965 Mustang Coupe
1966 Mustang Coupe "Black 'N Mild"
1967 Ford F100
2x 1968 Mustang Fastbacks
1968 Triumph GT6 - Ford 289/4speed
1968 Ford F100
1970 Porsche 911 Targa Carrera
1971 Triumph TR6
And a bunch of others I forgot... - Location: Hutto - Just NE of Austin, TX
Re: '66 B progress update
Good job!
You better drive your car as hard as mine when you're done. It'll be practically new... you need to wear it out as fast as possible.![Cool 8)](./images/smilies/icon_cool.gif)
You better drive your car as hard as mine when you're done. It'll be practically new... you need to wear it out as fast as possible.
![Cool 8)](./images/smilies/icon_cool.gif)
Chris "From Texas" Salisbury
- gorms68
- Core Member
- Posts: 678
- Joined: Sat Jul 26, 2008 8:10 pm
- Vehicles Owned: 1914 Chandler model 15
1929 Chandler model 65
1966 MGB roadster
1968 Mustang Dlx coupe - Location: Monrovia
Re: '66 B progress update
Thats a tough order! I've seen how quickly you rack up the miles.CJ Steak wrote:Good job!
You better drive your car as hard as mine when you're done. It'll be practically new... you need to wear it out as fast as possible.
![Bow :bow:](./images/smilies/bow.gif)
Chris Gorman
- gorms68
- Core Member
- Posts: 678
- Joined: Sat Jul 26, 2008 8:10 pm
- Vehicles Owned: 1914 Chandler model 15
1929 Chandler model 65
1966 MGB roadster
1968 Mustang Dlx coupe - Location: Monrovia
Re: '66 B progress update
It's been quite a while since I posted an update on our MGB project. As many of you know we got the car ready to drive only to find out that the transmission that we purchased about 20 years ago for the car needed to be rebuilt. Well the Vintage MG Swap Meet in November provided the source for another O/D tranny. Now I just needed he time and cooperation of the weather to make the swap.
Steve S made an offer I could not refuse. He offered to drive over and help make the swap. I spent my hours after work the days before getting everything ready. Then on Saturday we pulled the engine and tranny out and before late afternoon had the new tranny mated up and back in the car.
A few more days of work on the car after I got home made it ready to pull out of the garage last night. And I am very happy to report that the transmission works great so far, still need to try out the O/D. The icing on the cake is that there are no leaks!
Here is a picture from my cell phone of my wife and son leaving for a trip around the block. the bonnet will go back on this weekend and the rest of the car will be put together once I am happy with the way she runs.
Steve S made an offer I could not refuse. He offered to drive over and help make the swap. I spent my hours after work the days before getting everything ready. Then on Saturday we pulled the engine and tranny out and before late afternoon had the new tranny mated up and back in the car.
A few more days of work on the car after I got home made it ready to pull out of the garage last night. And I am very happy to report that the transmission works great so far, still need to try out the O/D. The icing on the cake is that there are no leaks!
Here is a picture from my cell phone of my wife and son leaving for a trip around the block. the bonnet will go back on this weekend and the rest of the car will be put together once I am happy with the way she runs.
- Attachments
-
- 1.jpg (61.48 KiB) Viewed 38725 times
Chris Gorman
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
Re: '66 B progress update
Woohoo! Awesome to see the car driving again.
![Drive :drive](./images/smilies/icon_drive.gif)
![Smile :)](./images/smilies/icon_smile.gif)
![Thumbs Up :thumbs:](./images/smilies/icon_thumbsup.gif)
![Drive :drive](./images/smilies/icon_drive.gif)
- Larry Kluss
- Veteran Member
- Posts: 1088
- Joined: Wed Jul 25, 2007 12:28 pm
- Vehicles Owned: -
1967 MGB (Works tribute)
1968 E-type Jaguar FHC
1974 Chevy Nova SS (faux)
2000 Ford Ranger XLT
2008 Jaguar XJ L - Location: Conejo Valley
Re: '66 B progress update
Congratulations. It looks great. Very rare to see an MGB gone through as completely as you have done yours. I love the B in BRG..I had a BRG '65 for a short time 30 years ago.
Hope we can see it in person at Queen's English next month.![Smile :)](./images/smilies/icon_smile.gif)
Hope we can see it in person at Queen's English next month.
![Smile :)](./images/smilies/icon_smile.gif)
- Jimmy
- Don't take him seriously!
- Posts: 1434
- Joined: Tue May 26, 2009 7:25 pm
- Vehicles Owned: '74-1/2 MGB
'76 MGB (parts car)
'52 TD
'71 MGB staqtion wagon
'69 MGB (parts car)
'60 Sprite
'79 MG Midget (parts car)
'63 LBC
Plus, a Turbo S (with a damn roof) in the household.
And three Mercedes on 20" wheels. - Location: NM
Re: '66 B progress update
And when was the last time you had that happen, Steve? Huh?Steve Simmons wrote:Woohoo! Awesome to see the car driving again.![]()
![]()
In baseball, running into someone is apparently a "collision".
But doing the same thing in a car somehow makes it an "accident".
But doing the same thing in a car somehow makes it an "accident".
- gorms68
- Core Member
- Posts: 678
- Joined: Sat Jul 26, 2008 8:10 pm
- Vehicles Owned: 1914 Chandler model 15
1929 Chandler model 65
1966 MGB roadster
1968 Mustang Dlx coupe - Location: Monrovia
Re: '66 B progress update
Looks like a fun meet. I'll try and make that one.Larry Kluss wrote:Congratulations. It looks great. Very rare to see an MGB gone through as completely as you have done yours. I love the B in BRG..I had a BRG '65 for a short time 30 years ago.
Hope we can see it in person at Queen's English next month.
Chris Gorman
- gorms68
- Core Member
- Posts: 678
- Joined: Sat Jul 26, 2008 8:10 pm
- Vehicles Owned: 1914 Chandler model 15
1929 Chandler model 65
1966 MGB roadster
1968 Mustang Dlx coupe - Location: Monrovia
Re: '66 B progress update
Just took the car out for a run to Cable Airport in Upland for lunch. Car ran great most of the way, little rough on the way back after we went about a mile on the freeway. Will check that out later. But look at this picture we took in front of a Tiger Moth also parked at Cable. Wonderful day for a drive!
- Attachments
-
- 1.jpg (57.72 KiB) Viewed 38709 times
Chris Gorman
- gorms68
- Core Member
- Posts: 678
- Joined: Sat Jul 26, 2008 8:10 pm
- Vehicles Owned: 1914 Chandler model 15
1929 Chandler model 65
1966 MGB roadster
1968 Mustang Dlx coupe - Location: Monrovia
Re: '66 B progress update
Rough running fixed, loose spark plug wire on #4. Whew, glad it was that easy!
Chris Gorman
- gorms68
- Core Member
- Posts: 678
- Joined: Sat Jul 26, 2008 8:10 pm
- Vehicles Owned: 1914 Chandler model 15
1929 Chandler model 65
1966 MGB roadster
1968 Mustang Dlx coupe - Location: Monrovia
Re: '66 B progress update
Another milestone is passed! Plates and tags on the car.
Note the 1966 tag on the plate.
Note the 1966 tag on the plate.
- Attachments
-
- 1.jpg (49.75 KiB) Viewed 38679 times
Chris Gorman
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
Re: '66 B progress update
Nice! Good letter combination, too. Now that you're legal, and assuming you only plan to run one plate on the car, you can safely hang the plate with the original tags in the garage and put your current tag on the other plate like you would a modern car. As far as I know there's no way for anyone to ever know you assigned the plates through the YOM program, so I can't think of any reason to run for tags like they tell you to.
See you tomorrow on the London to Brighton run?![Cool 8)](./images/smilies/icon_cool.gif)
See you tomorrow on the London to Brighton run?
![Cool 8)](./images/smilies/icon_cool.gif)
- gorms68
- Core Member
- Posts: 678
- Joined: Sat Jul 26, 2008 8:10 pm
- Vehicles Owned: 1914 Chandler model 15
1929 Chandler model 65
1966 MGB roadster
1968 Mustang Dlx coupe - Location: Monrovia
Re: '66 B progress update
Unfortunately no, Chandler has a baseball game. He is starting pitcher too, can't miss this one.
I kinda of like having the old 1966 tag on their. The frame is kinda of different in that I can display both and not alter the YOM plate.
We also juggled our SAFTY FST plate onto our truck while Jill was at AAA making arrangements for the B and the BGT. It looks better there and with the MG logo in the rear window it might make more sense to some people.
I kinda of like having the old 1966 tag on their. The frame is kinda of different in that I can display both and not alter the YOM plate.
We also juggled our SAFTY FST plate onto our truck while Jill was at AAA making arrangements for the B and the BGT. It looks better there and with the MG logo in the rear window it might make more sense to some people.
Chris Gorman
- gorms68
- Core Member
- Posts: 678
- Joined: Sat Jul 26, 2008 8:10 pm
- Vehicles Owned: 1914 Chandler model 15
1929 Chandler model 65
1966 MGB roadster
1968 Mustang Dlx coupe - Location: Monrovia
Re: '66 B progress update
Been way too long since I posted an update on our '66 B. Took this week off so I got some time to work and play with the car. One annoying bug I have wanted to fix is the breather for the side cover. On this car I chose to deviate from stock in two areas. First I installed a Maniflow intake to promote breather air flow and a smoother idle, seems to work very well
This eliminates the location for the stock PCV valve though.
Well I also replaced the two piece side covers with a single one piece aluminum plate. Initially I thought I could get away with just a small open air breather. Worked fine as long as I was not on the gas and not on the freeway. Pleanty of oil made it past the breather to spray on to the hot header
This time I drilled a 9/16" hole in the side cover and taped the hole for some 3/8" copper pipe, which feeds a hose to the "new" air filters I bought. Neither the stock air cleaners or the aftermarket unit I had put on the car had an opening to suck the vented air/oil mixture out of the pressurized engine. My "new" Burgess Wet Type Air Filters have a port on the rear air cleaner assembly that does the trick. These filters were stock for a AH 100 from the mid 1950's so they look period correct on the engine another important consideration of mine. MOSS also sell parts for them if needed and I can fit K&N filters in them in the future. So far I am very happy with the results.
![Drive :drive](./images/smilies/icon_drive.gif)
Well I also replaced the two piece side covers with a single one piece aluminum plate. Initially I thought I could get away with just a small open air breather. Worked fine as long as I was not on the gas and not on the freeway. Pleanty of oil made it past the breather to spray on to the hot header
![Sad :(](./images/smilies/icon_sad.gif)
This time I drilled a 9/16" hole in the side cover and taped the hole for some 3/8" copper pipe, which feeds a hose to the "new" air filters I bought. Neither the stock air cleaners or the aftermarket unit I had put on the car had an opening to suck the vented air/oil mixture out of the pressurized engine. My "new" Burgess Wet Type Air Filters have a port on the rear air cleaner assembly that does the trick. These filters were stock for a AH 100 from the mid 1950's so they look period correct on the engine another important consideration of mine. MOSS also sell parts for them if needed and I can fit K&N filters in them in the future. So far I am very happy with the results.
- Attachments
-
- side cover drilled and taped for a 3/8" copper vent pipe
- 2.jpg (39.73 KiB) Viewed 38654 times
-
- Burgess Wet type air filters with PVChose to rear air cleaner
- 1.jpg (75.66 KiB) Viewed 38654 times
-
- the first attempt to let the engine breathe
- 1.jpg (82.07 KiB) Viewed 38654 times
-
- and my first aftermarket air cleaner
- 1.jpg (75.61 KiB) Viewed 38654 times
Chris Gorman
- Steve Simmons
- Site Admin
- Posts: 4106
- Joined: Thu Sep 07, 2006 9:45 pm
- Vehicles Owned: .
1937 MG SA Saloon
1946 John Deere AN
1949 MG TC
1953 MG TD
1958 MGA Roadster
1959 Morris Minor 1000
1965 MGB
1967 MGB GT (UK-Spec)
1967 Austin Healey 3000 BJ8
1969 MGC GTS - Location: Co-Nay-Ho Valley
- Contact:
Re: '66 B progress update
How original are all those electronics you put in the car?
Seriously though, it looks great. I love those air cleaners!
![Devil :devil:](./images/smilies/icon_devil.gif)
Seriously though, it looks great. I love those air cleaners!
- gorms68
- Core Member
- Posts: 678
- Joined: Sat Jul 26, 2008 8:10 pm
- Vehicles Owned: 1914 Chandler model 15
1929 Chandler model 65
1966 MGB roadster
1968 Mustang Dlx coupe - Location: Monrovia
Re: '66 B progress update
More good news to report!
I finally have the O/D system working! Just got back from a test drive and boy is it neat when that O/D kicks in for the first time. Another project accomplished![Drive :drive](./images/smilies/icon_drive.gif)
I finally have the O/D system working! Just got back from a test drive and boy is it neat when that O/D kicks in for the first time. Another project accomplished
![Drive :drive](./images/smilies/icon_drive.gif)
Chris Gorman
- Larry Kluss
- Veteran Member
- Posts: 1088
- Joined: Wed Jul 25, 2007 12:28 pm
- Vehicles Owned: -
1967 MGB (Works tribute)
1968 E-type Jaguar FHC
1974 Chevy Nova SS (faux)
2000 Ford Ranger XLT
2008 Jaguar XJ L - Location: Conejo Valley
Re: '66 B progress update
Looks great Chris. I was really hoping to see it at QE, but...
Perhaps the memorial day run???
Perhaps the memorial day run???
- gorms68
- Core Member
- Posts: 678
- Joined: Sat Jul 26, 2008 8:10 pm
- Vehicles Owned: 1914 Chandler model 15
1929 Chandler model 65
1966 MGB roadster
1968 Mustang Dlx coupe - Location: Monrovia
Re: '66 B progress update
Time for another update.
Got the windows and door panels installed last weekend. This weekend we installed our new tonneau cover. I am real happy with how nicely it fits.
Got the windows and door panels installed last weekend. This weekend we installed our new tonneau cover. I am real happy with how nicely it fits.
- Attachments
-
- Door panels and windows finally in.
- 1.jpg (69.47 KiB) Viewed 38602 times
-
- 2.jpg (42.69 KiB) Viewed 38602 times
Chris Gorman